CM MP Solar Pump Controller

CM MP Solar Pump Controller

CM MP Solar Pump Controller – Efficient Solar Power AC/DC Controller

The CM MP Solar Pump Controller adds advanced monitoring and control to your solar pump system. It allows you to view electrical parameters, record alarm history, connect pressure or flow sensors, and integrate float or pressure switches for automatic operation. With optional WiFi or GSM, the CM MP also enables full remote monitoring and programming. It can be used permanently or simply for setup, with all settings saved directly to the pump’s onboard electronics.

Categories: , ,

Description

CM MP Controller

The CM MP Solar Pump Controller provides enhanced control, monitoring, and remote management for your solar pumping system. While the pump’s onboard inverter includes full protection against overload, surges, and dry running, the CM MP adds an advanced interface for users who want deeper visibility and control.

If the CM MP is not installed, simple signal cables can still be used to start and stop the pump through devices like a float or pressure switch. When connected, the CM MP unlocks a full range of features:

  • Monitor key electrical parameters including current, power, and voltage

  • Record and store alarm history and operating hours

  • Connect pressure or flow sensors for real-time performance monitoring

  • Integrate float or pressure switches for automated pump control

  • Provide an alarm output for remote notification

  • Enable remote monitoring and programming through an optional GSM or WiFi module and the online interface

The CM MP can also be used temporarily during setup to configure pump parameters such as maximum frequency. Once the settings are saved to the pump’s electronics, the module can be removed and reconnected anytime to review alarms or adjust system settings.

Specifications

CM MP Control Module
Supply voltage 30 – 400 VDC ; 1 x 90 – 265 VAC
Network supply frequency 50 – 60 Hz (+/- 2%)
EMC compliance EN61800-3 C2
Relative humidity of the operating environment 5 – 95% non-condensing
Max ambient temperature 50 °C (122 °F)
Protection grade IP55 (NEMA 4)
Materials Aluminium enclosure, PVC labels , cable gland in polyamide (PA), display membrane in polyester (PE)
Analog input 2 input 4-20 mA + 2 input 4-20 mA or 0-10 V settable by the user
Digital input 4 input N.O or N.C settable by the user
Digital output 2 relays output 5 A , 250 VAC, N.O or N.C settable by the user
User display display LCD backlit, 16 characters x 2 rows, 5 buttons
Connectivity RS485 MODBUS RTU, BACnet, Bluetooth SMART
Dimensions 180x180x120 mm (7,1”x7,1”x 4,7”)
Weight 2,5 kg (5,5 lb)

Attachments

Related products